Motogadget m Unit V.2 Custom Motorcycle Switch Control Center and Fuse Panel


Motogadget m Unit V.2 Custom Motorcycle Switch Control Center and Fuse Panel


Sold Out!

SKU:  MG-4002033 Brand:

Product Description

Motogadget m Unit

The motogadget m unit V.2 is a digital control unit for your motorbike – the ‘heart’ of the vehicle’s electrical system.

The Motogadget m Unit V.2 can be operated by push-button control or conventional switch controls mounted at the handle bar. The control box is used for switching of all necessary vehicle components and doubles as fuse panel.
Its compact case has the approximate size of a cigarette box and is completely moulded in – resistant to water, weather and vibrations. 
It is easily mounted by two M5 screws. All cable connections are made using terminal blocks.

The Motogadget m Unit V.2 is the ‘electrical heart’ of the motorbike. All switching operations are completely digitally controlled by a microprocessor and the latest solid-state technology – completely without mechanical relays, taking vehicle electrical systems to a new level!

Features of the new version V.2

– reduced
 standby current of 0.35 mA (equivalent to 0.00035 A) if alarm system off, and 0.48 mA (equivalent to 0.00048 A) if alarm system on –  for longerbattery life
alarm system triggered by position-independent MEMS 3D gravity sensor.Installation in every position possible
alarm system with adjustable pre-alarm and adjustable levels of sensitivity
– alarm system can be deactivated for easy transport mode
 integrated parking light
 voltage range of 3V to 20V 

– can be used with 6V and 12V electrical systems
 with extended voltage range, 
starting of an engine with a large displacementor high compression is no longer a problem
 protected against reverse polarity
 protected against overvoltage
 extreme cable reduction by integrating all cables of switch or push buttons control including brake light switch in the handlebar. With only one cable the m-Unit V.2 is 
operated via a digital bus technology (product mButton is required)

Dimensions and specifications

L/W/H: 101 x 61 x 28 mm
Weight: approx. 180 g
Fixture: 2 x M5 screws, stainless steel (mounting and ground terminal), 1 x M5 screw-on terminal for battery positive
Operating voltage: 3V – 20V
Operating temperature: -20 °C… +80 °C

1 x input (plus, switched) for ignition lock or m-Lock
7 x pilot input (minus/ground, switched) for left turn signal, right turn signal, low beam/high beam, starter, horn, brake light, kill switch or setup respectively

8 x output (plus) for left turn signal, right turn signal, low beam, high beam, starter, horn, brake light, AUX (switched plus for all other appliances)

Parts delivered

Motogadget m Unit V.2, approx. 50 cm connector cable for battery plus terminal with 10 mm² nominal cross-section, 2 cable eyelets, 1 x M5 stainless steel screw, 2 x M5 stainless steel screw with nut, detailed installation and operating instructions

All advantages summarized

  • Control over handle bar push-buttons or conventional switch control units
  • Completely replaces the fuse panel Up to 8 independent circuits are digitally monitored and de-energized in case of failures. After removal of the fault, the safety feature is automatically reset
  • Diagnostics for all circuits use 15 status LEDs
  • highest possible operational dependability with micro processor controlled and monitored switching operations
  • flexible feature configuration due to simple device setup
  • No mechanical relays – newest generation semiconductors switch quickly, free of loss and wear.
  • utterly compact dimensions
  • The motogadget m unit V.2 provides for hassle-free wiring and requires minimal wiring harnessing.
  • Control of high and low beam possible with only one push-button.
  • Digital hazard light control – stays on even after de-energizing the main system.
  • integrated digital, load independent flasher relay (like m-Flash), timer-controlled automatic deactivation.
  • selectable flasher mode with fade-in/fade-out effect like with the m-Wave! timer-controlled automatic deactivation.
  • Navigation light feature selectable over all turn signals! Permanent low-light at each turn signal.
  • integrated digital brake light modulator (like m-Stop), selectable flasher mode.
  • integrated alarm system (gravity field sensor)
  • intelligent deactivation of certain devices at engine startup
  • only one cable required to control combined rear and brake lights
  • completely water tight and vibration resistant



Manual of motogadget m unit V.2 serial no. 00005841 and up

m-Unit V.2


Manual of m-Unit Cable Kit

m-Unit Cable Kit

Example of a wiring scheme only with m-Unit V.2

wiring scheme m-Unit V.2

Example of a wiring scheme with m-Unit V.2 and m-Button

wiring scheme m-Unit V.2 and m-Button

Additional Information

Weight 0.75 lbs
Dimensions 5 x 4 x 2 in



Electronic Accessories, Electronics, Gauges & Instruments, Motorcycle Parts







Part Type

Accessories, Gauges & Instruments, Motorcycle Parts, Electronics


There are no reviews yet.

Add Review

motogadget m unit

Be the first to review “Motogadget m Unit V.2 Custom Motorcycle Switch Control Center and Fuse Panel”

About Motogadget

Motogadget is synonymous with high quality instruments and innovative accessories for the motorcycle parts market. The product's outstanding design, features, material and finish make it a number one choice for many custom bike builders and bike enthusiasts. Many of the Motogadget products are either completely unique or put a modern spin on any bike build or electronics upgrade. Motogadget develops and test all products sold, either the whole production pipeline or the completion take place on premises by highly qualified team which are hand-crafted in most cases. By maintaining direct customer relations we gather valuable feedback from many countries and all realms of the biking world. Whether it is simplifying your wiring or your gauge cluster, Motogadget is dedicated to both improving the look of your motorcycle as well as its functionality. Each instrument is precision crafted out of premium materials to deliver a fit and finish that is unrivaled in the industry. 'Made in Germany' translates to quality from Berlin in this case and is sought after by excited customers striving to improve and embellish their bikes. The best choice in motorcycle electronics is Motogadget for the simplistic and modern approach to implementing the highest quality gadgets in the world.

Show products

Your Name (required)

Your Email (required)


Your Message